Español
At METELMEX we can deliver Custom Fabricated Grating. This service has the purpose of reducing time and money to the installer of the grating. It is offered by cutting our grating panels based on the drawings provided by the client. However, if the customer can not provide them, they can be developed by METELMEX engineering department.
Once the pieces are cut, they are presented to guarantee an easy installation. Each piece has an identification stamp, so the installer has a guide when assembling the grating.
How is the Custom Fabricated Grating process?
As previously mentioned, electroforged grating is cut to size according to the specifications provided by the client. In this case, the client must provide specific drawings for the cuts.
On the other hand, if the client does not have drawings or the ability to create them, our METELMEX engineering department is responsible for preparing the drawings according to the client’s specifications.
Onces the pieces are cut, they are presented to our client at our plant at full scale to ensure easy installation.
Each piece is identified by punch numbers. This way, while assembling them on-site, the installer can be guided by the numbered and detailed drawings.
CALCULATION OF NET AREA
The net area is calculated based on the distances from center to center, to rectangular area (whichever is greater), without discounting tolerances.
In the following figures, net area and waste are illustrated:
If you want to know more about how our Custom Fabricated Grating can adjust to your projects, contact us for personalized advice. That way we can offer the options that most suit your project’s specific needs. Remember that we complied with certifications and manufacture grates according to the most important quality standards.
To know more about our history and service visit our YouTube Channel.